jimmytees
3400 Landmark Rd Unit 3, Burlington, ON L7M 1S8
Phone: 905 331 4833
Fax: 9053314404

BACK TO PRODUCT LINE PAGE   |  Français

 
Price Search        

 
   

WB7075
WIDE MOUTH 500 ml (17 oz.) STAINLESS STEEL WATER BOTTLE


8.75” H x 2.75” Diameter

• Stainless steel
• An industry first with a matte metallic finish
• Large wide mouth opening makes for easy drinking
• Holds up to 500 ml (17 oz.)
• Safe alternative to plastic for your health and the environment
• Matching coloured plastic twist off cap (except Silver & Cream – black cap) with silver carabiner
• BPA free (Bisphenol A) and FDA Compliant

SP 1C - 7.5" W x 4" H (wraparound)
ETCH (silver), LAS (colours) - 0.75” W x 3” H (side)
AQ - 4" W x 4" H (side) (not available on black or red bottles)
Additional Colour/Location Decorating Costs for Screen Print, Transfer Print and/or Pad Print
Under 500 500 and over
Additional Color Additional Location Additional Color Additional Location
$0.80 $0.90 $0.60 $0.70
(4E)


Wrap-Around Screen Print
Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

Using the same concept as our screen printing method, a logo is evenly applied to a smooth, cylindrical surface using finer inks. The result is a 3/4 wrap-around imprint that is both crisp and clean.

Ink Change: All orders that require an ink colour change are subject to a charge of $35.00(E) per colour.

Etch Engraving (ETCH)
Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

This 'cutting edge' technology is very similar to laser engraving, but instead of a laser aimed at the product, the actual item is etched with a diamond tip. This creates an extremely crisp finish. Computerized engraving is used on our pens, aluminum, wine opener levers, and plates.
Up to 3 square inches, utilize imprinted price and add $0.85 (E)
up to 8 square inches, utilize imprinted price and add $1.40 (E)
For each additional square inch above 8 square inches, please add $0.75 (E)
Personalized etch engraving offered on Bonded Leather line faceplates only. Utilize imprinted/no imprint price and add $4.00 (E) each.

Laser Engraving (LAS)
Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

Your logo attains a refined and elegant look with engraving. The logo is carved directly into the surface using a laser. The even and clean lines create a novel and detailed logo. Laser Engraving is most common on wood products and metal products, such as carabiners.
Laser Engrave on carabiners utilize imprinted price and add $0.40 (E).
Up to 3 square inches, utilize imprinted price and add $0.85 (E)
up to 8 square inches, utilize imprinted price and add $1.40 (E)
For each additional square inch above 8 square inches, please add $0.75 (E)

Billable Sample
Due to the high cost or nature of this item, we will be invoicing your firm the end column no imprint cost when ordering a sample. Billable samples are non-returnable and non-refundable. NOTE: All billable samples are subject to a freight charge.


AQUA MARK (AQ) - Spot Colour printing for Drinkware
- Minimum two colour imprint
Set up charges are $60.00(G) per colour/design
Repeat set up charge: $30.00(G) each
Utilize imprinted price and add the following run charges:
$2.15(E) for up to 3 spot colours
Each additional spot colour after the 3rd colour $0.40(E) each
If you require an Aqua Mark in a 2nd location, an additional location running charge (based on quantity-see pricing grid on this page) AND applicable Aqua Mark running charges will apply.
Similar to traditional transfer printing, Aqua Mark has been developed exclusively for use on drinkware. Ink is applied to a sheet of transfer paper instead of directly onto the material. The transfer is then applied directly onto the product. This method allows for spot colour separations (PMS colour match). A clear overlay is always required. A white underlay may be required on dark product colours or glass.

Production time for full order is 20-25 business days. A preproduction sample may be required for approval prior to full production. Longer lead times required for larger quantities.

Acrylic and stainless: hand wash only in lukewarm water with a soft cloth. Glass, Tritan® and Ceramic: top rack of dishwasher on the China/Gentle cycle.

Ink Change: All orders that require an ink colour change are subject to a charge of $35.00(E) per colour.

Screen Print (SP 1C)
Set up charge $60.00 (G) each
Repeat set up charge: $30.00 (G) each.

The direct screen printing process with a maximum of 1 Spot colour involves placing the material under a mesh screen. By applying even pressure with a squeegee on the screen, your logo is imprinted onto the material surface. The screen printing process ensures your imprint looks its best on a wide variety of fabrics. This is the most common method of decoration.

Ink Change: All orders that require an ink colour change are subject to a charge of $35.00(E) per colour.

Quantity